Airlive Wl 5470ap Firmware
Airlive wl 5470ap firmware: How to update and configure your wireless access point
The Airlive wl 5470ap is a wireless access point that can provide high-speed and reliable wireless connectivity for your home or office network. It supports multiple operation modes, such as AP, WDS, Universal Repeater, and Client. It also has advanced features, such as QoS, VLAN, and SNMP. However, to enjoy the full benefits of this device, you need to update its firmware and configure its settings according to your needs.
How to update the Airlive wl 5470ap firmware
The firmware is the software that runs on the device and controls its functions. Updating the firmware can improve the performance, stability, and security of the device. To update the Airlive wl 5470ap firmware, you need to follow these steps:
Airlive wl 5470ap firmware
Download the latest firmware version from the official website of Airlive. You can search for your device model and select the appropriate region. The firmware file should have a .bin extension.
Connect your computer to the Airlive wl 5470ap using an Ethernet cable. Make sure your computer has a static IP address in the same subnet as the device. The default IP address of the device is 192.168.1.254.
Open a web browser and enter the IP address of the device in the address bar. You should see the login page of the device. The default username and password are both admin.
After logging in, go to System Tools > Firmware Upgrade. Click on Browse and select the firmware file you downloaded in step 1. Click on Upgrade and wait for the process to complete. Do not power off or disconnect the device during the upgrade.
After the upgrade is done, the device will reboot automatically. You can check the firmware version by going to Status > Device Information.
How to configure the Airlive wl 5470ap settings
The Airlive wl 5470ap has various settings that you can customize according to your network requirements. Some of the most important settings are:
Operation Mode: This determines how the device functions in your network. You can choose from AP, WDS, Universal Repeater, or Client mode. Each mode has its own advantages and disadvantages, depending on your network topology and needs.
Wireless Settings: This allows you to configure the wireless parameters of the device, such as SSID, channel, encryption, etc. You can also enable or disable wireless functions, such as WMM, WPS, etc.
Network Settings: This allows you to configure the IP address, subnet mask, gateway, DNS, etc. of the device. You can also enable or disable DHCP server or client functions.
Security Settings: This allows you to set up firewall rules, MAC filtering, port forwarding, DMZ, etc. to protect your network from unauthorized access or attacks.
Advanced Settings: This allows you to enable or disable QoS, VLAN, SNMP, etc. to optimize your network performance and management.
To configure these settings, you need to log in to the web interface of the device as described in step 3 of the previous section. Then you can go to different tabs and menus to change the settings as you wish. You can also refer to the user manual or online resources for more detailed instructions and explanations.
Conclusion
The Airlive wl 5470ap is a versatile and powerful wireless access point that can meet your network needs. However, you need to update its firmware and configure its settings properly to ensure its optimal performance and security. By following this article, you should be able to do so easily and quickly.